- Accessory
- Actuator, Control Circuit, Cable for the motor(3m), Connector for Regeneration Unit Input/Main Power Input Terminals, Sensor Signal Connector, Input Signal Connector, Output Signal Connector, Connector for 24 VDC Power Supply Input/Regeneration Unit Thermal Input/Electromagnetic Brake Output Terminals, Lever for wiring connector
- Safety Standards
-
| Product Name | Lead Time | Price (THB) | |
|---|---|---|---|
| DG200R-ARAAD2-3 | 77 Working Days | 94,063.00 |
●Production Information
Product to be discontinued (Order deadline, 31/Jan/2025)
●Component Name
DGM200R-ARAC（Actuator）
ARD-AD（Control Circuit）
| Motor Type | αSTEP AR Series |
|---|---|
| Shaft Type | Single Shaft |
| Output Table Supporting Bearing | Cross-Roller Bearing |
| Frame Size | 200mm |
| Electromagnetic Brake | Without |
| Driver Type | Built-in Positioning Function |
| Repetitive Positioning Accuracy | ±15arcsec (±0.004°) |
| Lost Motion | 2arcmin (0.033°) |
| Permissible Torque | 50N･m |
| Inertial Moment J | 916400×10^-7kg・m^2 |
| Permissible Speed | 110r/min |
| Gear Ratio | 18 |
| Angular Transmission Error | 2arcmin (0.033°) |
| Permissible Thrust Load | 4000N |
| Permissible Moment Load | 100N･m |
| Runout of Output Table Surface | 0.015mm |
| Runout of Output Table Inner (Outer) Diameter | 0.030mm |
| Parallelism of Output Table | 0.050mm |
| Actuator Degree of Protection | IP40 *2 |
| Speed and Positioning Control Command | Built-in Positioning Function Type |
| Power Supply Input - Voltage | Single-Phase 100-120 VAC -15～+6% |
| Power Supply Input - Frequency | 50/60Hz |
| Power Supply Input - Current | 5.9A |
| Power Supply Input - Control Power Supply | DC24V±5% 0.25A |
| Mass: Actuator | 9.4kg |
| Mass: Control Circuit | 0.75kg |
- Minimum movement of the output table(Factory setting)：0.02deg/STEP
Motor Resolution：1000P/R *1
Holding Torque at Motor Standstill Power ON：36N･m
- ∗ The UL/CSA/CE mark on the actuator part is not the actuator product name. It is the motor product name.
- *1 Motor resolution at the time of shipping. For how to calculate the minimum movement [ ˚] of the output table with the gear ratio of 18, see [Other specifications].
●Depending on the driving conditions, a considerable amount of heat may be generated by the motor. Be sure to keep the motor case temperature at 100˚C or less.
●The repetitive positioning accuracy is measured at a constant temperature (normal temperature) under a constant load.
●IP20 for motor connector
The link of Web2CAD site can be used for 3D CAD data downloading as well. For more details, please click here.
| Operating Manual | Motorized actuator Hollow rotary actuator Function Setting Edition | HL-80019E.pdf |
|---|
| Dimension |
|---|
|
Actuator Control Circuit Cable Home Sensor Set Installation Dimensions |
| Characteristics Diagram |
|---|
|
Speed – Torque Characteristics Load Inertia – Positioning Time Mechanical Precision (At no load) Displacement by Load Moment |
| Other specifications |
|---|
|
Other specifications Driver General Specifications |