- Accessory
- Actuator, Control Circuit, Cable for the motor(1m), I/O Signals Connector, Connector for Regeneration Unit Input/Main Power Input Terminals, Connector for 24 VDC Power Supply Input/Regeneration Unit Thermal Input Terminals, Lever for wiring connector
- Safety Standards
Product Name | Lead Time | Price (THB) | |
---|---|---|---|
DG200R-ARBC2-1 | 77 Working Days | 92,333.00 |
●Production Information
Product to be discontinued (Order deadline, 31/Jan/2025)
●Component Name
DGM200R-ARBC(Actuator)
ARD-C(Control Circuit)
Motor Type | αSTEP AR Series |
---|---|
Shaft Type | Double Shaft |
Output Table Supporting Bearing | Cross-Roller Bearing |
Frame Size | 200mm |
Electromagnetic Brake | Without |
Driver Type | Pulse Train Input |
Repetitive Positioning Accuracy | ±15arcsec (±0.004°) |
Lost Motion | 2arcmin (0.033°) |
Permissible Torque | 50N・m |
Inertial Moment J | 916400×10^-7kg・m^2 |
Permissible Speed | 110r/min |
Gear Ratio | 18 |
Angular Transmission Error | 2arcmin (0.033°) |
Permissible Thrust Load | 500N |
Permissible Moment Load | 10N・m |
Runout of Output Table Surface | 0.015mm |
Runout of Output Table Inner (Outer) Diameter | 0.015mm |
Parallelism of Output Table | 0.030mm |
Actuator Degree of Protection | IP40 *1 |
Speed and Positioning Control Command | Pulse Train Input Type |
Power Supply Input - Voltage | Single-Phase 200-230 VAC -15~+10% |
Power Supply Input - Frequency | 50/60Hz |
Power Supply Input - Current | 4.1A |
Power Supply Input - Control Power Supply | DC24V±5% 0.5A |
Mass: Actuator | 9.4kg |
Mass: Control Circuit | 0.75kg |
- Minimum movement of the output table(Factory setting):0.02deg/STEP
Motor Resolution:1000P/R *1
Holding Torque at Motor Standstill Power ON:36N・m
- ∗ The UL/CSA/CE mark on the actuator part is not the actuator product name. It is the motor product name.
- *1 Motor resolution at the time of shipping. For how to calculate the minimum movement [ ˚] of the output table with the gear ratio of 18, see [Other specifications].
●The back shaft of the motor in the Double Shaft is intended for installing a slit disk. Do not apply load torque, radial load or axial load to the back shaft of the motor.
●Depending on the driving conditions, a considerable amount of heat may be generated by the motor. Be sure to keep the motor case temperature at 100˚C or less.
●The repetitive positioning accuracy is measured at a constant temperature (normal temperature) under a constant load.
The link of Web2CAD site can be used for 3D CAD data downloading as well. For more details, please click here.
Operating Manual | Motorized actuator Hollow rotary actuator Function Setting Edition | HL-80019E.pdf |
---|
Dimension |
---|
Actuator Control Circuit Cable Home Sensor Set Installation Dimensions |
Characteristics Diagram |
---|
Speed – Torque Characteristics Load Inertia – Positioning Time Mechanical Precision (At no load) Displacement by Load Moment |
Other specifications |
---|
Other specifications Driver General Specifications |