- Accessory
- Motor, Gearhead, Control Circuit, Conversion Cable, Connection Cable（2m）, CN1 Connector, CN5 Connector, CN7 Connector, Driver Mounting Bracket (with screws), Installation Screws, Parallel Key, Operating Manual
- Safety Standards
-
| Product Name | Lead Time | Price (THB) | |
|---|---|---|---|
| BXS460AM-30S-2 | Please contact us for more info | Please contact us for more info |
You cannot add this product to a cart. Sorry for your inconvenience but please contact to customer support centre.
●Production Information
Discontinued product in 31/Mar./2022
●Component Name
BXM460M-GFS（Motor）
GFS4G30（Gearhead）
BXSD60-A（Control Circuit）
| Frame Size | 80mm |
|---|---|
| Shaft/Gear Type | Combination Type Parallel Shaft Gearhead |
| Gear Ratio | 30 |
| Electromagnetic Brake | With |
| Included Cable | 2m |
| Rated Output Power | 60W |
| Power Supply Input Rated Voltage | Single-Phase 100-120VAC |
| Power Supply Input Permissible Voltage Range | -15～+10% |
| Power Supply Input Rated Frequency | 50/60Hz |
| Power Supply Input Permissible Voltage Range | ±5% |
| Power Supply Input Rated Input Current | 2.2A |
| Power Supply Input Maximum Input Current | 5.5A |
| Rated Torque (Motor Shaft) | 0.2N･m |
| Starting Torque (Motor Shaft) | 0.4N･m |
| Rated Speed (Motor Shaft) | 3000r/min |
| Speed Control Range | Digital setting:0.07-133r/min |
| Permissible Torque | Digital setting: 5.2N･m（0.07-100r/min） 3.9N･m（133r/min） |
| Permissible Load Inertia J | 800×10^-4kg･m^2 |
| Permissible Load Inertia J (When instantaneous stop or instantaneous bi-directional operation is performed) | 198×10^-4kg･m^2 |
| Rotor Inertia J | 0.24×10^-4kg・m^2 |
| Speed Regulation (Load) | ±0.05% or less: Conditions 0 ～ rated torque, rated speed, rated voltage, normal temperature |
| Speed Regulation (Voltage) | ±0.05% or less: Conditions Rated voltage −15～+10%, rated speed, no load, normal temperature |
| Speed Regulation (Temperature) | ±0.05% or less: Conditions Ambient temperature 0～+50℃, at rated speed, with no load, at rated voltage（Digital setting） |
| Continuous Regenerative Power | 100W |
| Instantaneous Regenerative Power | 240W |
| Applicable Regeneration Unit | EPRC-400P *1 |
| Electromagnetic Brake Type | Power off activated type *2 |
| Electromagnetic Brake Static Friction Brake | 0.2N･m |
| Standard | UL、CSA |
| CE Marking | affixed |
| Speed Setting Method | Set in either of the following methods. ・Operating Panel ・MEXE02✽ ・OPX-2A (Accessory) ✽ The Data Setting Software MEXE02 can be downloaded from the website. When using MEXE02, the data setting software communication cable CC05IF-USB (accessory) is required. |
| Acceleration Time / Deceleration Time | 0.000～30.00 s (Rated speed, no load running) |
| Protective Function | When the following protective functions operate, the ALM output is turned off, and the motor is stopped. At the same time, the alarm code is indicated in the operating panel.Overfl ow, overcurrent, overvoltage, undervoltage, overload, overspeed, EEPROM failure, initial sensor failure, initial operation inhibited, overheating of regeneration unit, software overtravel, operating data problem |
| Max. Extension Distance | Motor and Driver Distance: 30 m (Accessory connection cable used) |
| Time Rating | Continuous |
| Mass: Motor | 2.5kg |
| Mass: Control Circuit | 0.8kg |
- ✽1 Specification for products with electromagnetic brake
Do not start or stop the motor by turning the power supply ON/OFF, as it will cause abnormal wear to the electromagnetic brake.
✽2 Value when a regeneration unit is used.
Install the regeneration unit at a location that has the same heat radiation capability as an aluminum heat sink that is 350×350 mm and 3 mm thick.
The link of Web2CAD site can be used for 3D CAD data downloading as well. For more details, please click here.
| 2D-CAD | Combination Type Motor | C154B.dxf |
|---|---|---|
| Control Circuit | C259.dxf | |
| 3D-CAD | Combination Type Motor | C154B.step |
| Control Circuit | C259.step | |
| 3D-CAD(web2CAD) | Motor / Gearhead | to web2CAD site |
| Control Circuit | to web2CAD site | |
| Catalogue | Brushless Motor and Driver Packages BXII Series | BXII_Series_a.pdf |
| Operating Manual | Brushless Motor and Driver Package BXII Series USER MANUAL | HM-5142E.pdf |
| Data Setter OPX-2A OPERATING MANUAL Before Use | HM-40142E.pdf | |
| Data setter OPX-2A OPERATING MANUAL BXII Series | HP-5058E.pdf |
| Dimension |
|---|
|
Motor Control Circuit Connection Cables |
| Characteristics Diagram |
|---|
|
Speed – Torque Characteristics Overrun characteristic (typical value) |
| Other specifications |
|---|
|
Other specifications |