Driver for 5-Phase Stepper Motors

CVK Series SC Type

Driver for 5-Phase Stepper Motors CVK Series SC Type
  • DC input
  • Easy speed control with ON/OFF signal
  • Pulse generator not required

คุณลักษณะ | Driver for 5-Phase Stepper Motor CVD Series SC Type

Recommended for the Following Applications

  • Regular Feed Operation

    Operation by turning the forward input ON and OFF is possible.

    Regular Feed Operation
  • back-and-forth operation

    Operation by turning the forward/reverse input ON and OFF is possible.

    back-and-forth operation
  • 2-Speed Switching Operation

    2-Speed Switching Operation is possible.

    2-Speed Switching Operation
  • Smooth Low Speed Operation

    Speed range is from 0.02 r/min to 600 r/min

    Smooth Low Speed Operation

Pulse generator not required. Simple System Configuration Realized by I/O Control

Simple configuration with only motor, driver, and programmable controller. The operating speed, acceleration/deceleration time and operating current are set by driver switches, and the FWD (RVS) input is simply turned ON and OFF. Simple speed control with the performance of a speed control motor is possible.

Pulse Generator Not Required. Simple System Configuration Realized by I/O Control

2 Different Speeds Can be Set

The driver can be set to 2 different speeds and switched externally.
Speed Setting Range: 0.02 r/min~600 r/min

  • Back-and-Forth Operation

    back-and-forth operation
  • 2-Speed Switching Operation

    2-Speed Switching Operation

Click here for how to set the speed

Improved Repeatability of Stopping Position Due to Constant Overrun Amount When Operation Input is OFF

When the motor is stopped, the deceleration travel amount will not change due to load inertia or frictional load under the same operation conditions, even if the load weight changes. This improves the repeatability of the stop position.

Contributing to Motor Downsizing and Equipment Miniaturization

Holding Torque Even at Motor Standstill

Even when the motor is stopped, current is supplied to the motor, which generates torque. Therefore, it can hold the load (holding force is 50 % of the maximum holding torque).

List of Applicable Motors

Driver Product Name Motor Rated Current Applicable Motor
Right-Angle Type with mounting plate With Mounting Plate
CVD512BR-KSC CVD512B-KSC 1.2 A/Phase PKP523N12■, PKP525N12■
CVD518BR-KSC CVD518B-KSC 1.8 A/Phase PKP543N18■2, PKP544N18■2, PKP545N18■2, PKP 546N18■2
CVD524BR-KSC CVD524B-KSC 2.4 A/phase PKP564FN24■2, PKP566FN24■2, PKP569FN24■2
  • *A (single shaft) or B (double shaft) is used in place of ■ to indicate the shape.

Product Line

Type Power Supply Input
Right-Angle Type With Mounting Plate DC power supply
With Mounting Plate
จำกัดผลิตภัณฑ์

จำกัดผลิตภัณฑ์

ดาวน์โหลด

Operating Manual

รายการและข้อมูลที่เกี่ยวข้อง