บริษัท โอเรียนทัล มอเตอร์ จำกัด

αSTEP AZ Series mini Driver DC Input

AZD-KREP

AZD-KREP

Control Circuit

การจำแนกประเภทผลิตภัณฑ์ ชื่อผลิตภัณฑ์ รายการราคา วันที่จัดส่ง
Control Circuit AZD-KREP THB 18,864 22 Working Days
• This product is a stepping motor driver circuit only.
• Various data may be shown on the combination product page. Please check the page of the combination product.

รวม

  • Control Circuit: None

ข้อมูลเฉพาะ

ขนาด

Control Circuit

Control Circuit

ดาวน์โหลดข้อมูล

ข้อมูลเฉพาะอื่น ๆ

Driver Specifications

Driver Product Name AZD-KRED AZD-KREP AZD-KRPN AZD-KREN AZD-KR2D AZD-KRX
Interface
 
Pulse Input
  • 2 points, photocoupler
  • Maximum Input Pulse Frequency
    Line Driver: 1 MHz
    (at 50% duty)
    Open Collector: 250 kHz
    (at 50% duty)
Control Input 20~32 V DC
2 points, photocoupler
4.5~32 V DC
5 points, photocoupler
Control output 4.5~32 V DC
3 points, photocoupler and open-collector
Field
Network
EtherCAT EtherNet/IP PROFINET Modbus TCP
Modbus UDP
RS-485 Communication RS-485 Communication

Driver function

Driver Product Name AZD-KREP
AZD-KRPN
AZD-KREN
AZD-KR2D
AZD-KRX
Number of Positioning Data Sets 256 Points 256 Points*1
Remote I/O Input 16 Points
Output 16 Points
Setting Tool Support Software MEXE02
Coordinates Management Method Battery-free Absolute System
Operation Positioning Operation Product Line Positioning Operation
Positioning Push-Motion Operation*2
Fastening method Single-motion Operation
Sequential Operation
Multistep Speed-Change (Configuration Connection)
Sequence
Control
Loop Operation (Repeating)
Event Jump Operation
Speed Control Operation (Continuous operation)
Return-To-Home Operation Return-to-Home Operation*3
High-speed return-to-home operation
JOG Operation
Monitor/Information Waveform Monitoring
Overload Detection
Overheat Detection
(Motor and Driver)
Position/Speed Information
Temperature Detection
(Motor and Driver)
Motor Load Factor
Travel Distance , Cumulative Travel Distance
Alarm
*1
It can be used by setting it with the MEXE02 support software.
*2
Push-motion operation is not available for the geared motor and electric actuator DGII Series.
*3
Return-to-home operation using direct I/O is not available for AZD-KR2D.

Communication Specifications

Communication Protocol EtherNet/IP (CT18 compliant)
Vendor ID 187: Oriental Motor Company
Device Type 43: Generic Device
Transmission Rate 10/100 Mbps (autonegotiation)
Mode Full duplex/half duplex (autonegotiation)
Cable Specification Shielded twisted pair (STP) cable
Straight/cross, Category 5e or higher recommended
Number of Occupied Bytes Output (Scanner → Driver) 40 bytes
Input (Driver → Scanner) 56 bytes
Implicit Communication Number of Connections Supported 2
Connection Type Exclusive owner, input only
Communication Cycle (RPI) 1~3200 ms
Connection Type (Scanner → Driver) Point−to−Point
Connection Type (Driver → Scanner) Point−to−point, multicast
Data Trigger Cyclic
IP Address Setting Method IP address setting switches, parameters, DHCP
Supported Topologies Star, linear, ring (device level ring)

Driver General Specifications

Item Specification
Operating Environment (In operation) Ambient Temperature 0 to +50 °C (Non-freezing)
Ambient Humidity 85 % max. (Non-condensing)
Atmosphere No corrosive gases or dust. No exposure to water, oil or other liquids.

มาตรฐาน

Regulations and Standards Materials

Documents about compliance with regulations and standards can be downloaded from the "Data Download" tab on the product details page.
(The types of files available for download vary by product.)

Explanations of the Global Laws, Regulations and Standards can be found here.

Information about our compliance with regulations and standards for each of our product series can be found here.

Hazardous Substances

The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).

การกำหนดค่าระบบ

System Configuration

สายเคเบิลและอุปกรณ์เสริม

close