AC Speed Control Motors US Series

M590-502C

การจำแนกประเภทผลิตภัณฑ์	ชื่อผลิตภัณฑ์	รายการราคา	วันที่จัดส่ง
Motor	M590-502C	THB 9,181	17 Working Days

• This product is a motor only (component) of the speed control motor and controller package.

ข้อมูลเฉพาะ

Item		Motor	Speed Controller
Insulation Resistance		100 MΩ or more when a 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity.	After rated operation at normal ambient temperature and humidity, the value measured with a 500 VDC megger between the power supply terminal and FG terminal is min. 100 MΩ.
Dielectric Strength		After continuous rated operation at normal ambient temperature and humidity, no abnormalities were observed even with an application of 1.5 kVAC at 50 Hz or 60 Hz between the coils and the case for 1 minute.	No abnormality is observed even with an application of 1.5 kVAC at 50 Hz or 60 Hz between the power supply terminal and FG terminal for 1 minute after rated operation at normal ambient temperature and humidity.
Temperature Rise		After no-load rated operation at normal ambient temperature and humidity, the motor surface temperature rise measured by the thermometer method is 55 °C max. (45°C or less for a US560, US590 Type).	-
Overheat Protective Device		US560, US590 Type with Built-In Thermal Protector (Automatic Reset Type) Open: 120±5℃ Reset: 77±15℃	-
Operating Environment	Ambient Temperature	6 W~40 W: -10~+40°C (Non-freezing) 60 W, 90 W: -10~+50°C (Non-freezing)	0∼+40 °C (Non-freezing)
Operating Environment	Ambient Humidity	85 % max. (Non-condensing)
Thermal Class		120(E)	-

Note

Do not perform an insulation resistance measurement or a dielectric strength test while the motor and speed controller are connected.

The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).