บริษัท โอเรียนทัล มอเตอร์ จำกัด

Speed controller MSC-1

MSC-1

พิมพ์ข้อมูลผลิตภัณฑ์ทั้งหมดในครั้งเดียว
MSC-1

Control Circuit

การจำแนกประเภทผลิตภัณฑ์ ชื่อผลิตภัณฑ์ รายการราคา วันที่จัดส่ง
Control Circuit MSC-1 THB 3,257 10 working days
• This product is a speed controller only. A motor and gearhead is required for driving.

รวม

  • Control Circuit, CN1 connector, Operating Manual

ข้อมูลเฉพาะ

ขนาด

Control Circuit

Control Circuit

ดาวน์โหลดข้อมูล

ข้อมูลเฉพาะอื่น ๆ

Control Circuit Specifications

Speed Controller Product Name MSC-1
Power Supply Voltage Single-Phase 100/110/115 V±10%
Single-Phase 200/220/230 V±10%
Power Supply Frequency 50/60 Hz
Applicable Speed Controls
Motor Output Power		 6 W, 15 W, 25 W, 40 W, 60 W, 90 W
Variable Speed Range 50Hz: 90~1400r/min
60Hz: 90~1600r/min
Functions Speed control, no-contact instantaneous stop, no-contact bidirectional rotation, no-contact rotation speed switching,
slow start/slow down (0.3~15 sec. at 1000 r/min with no load)
Speed Setting Methods

Set the speed in the following way.

  • Internal Speed Potentiometer
  • External Speed Potentiometer: Accessory (sold separately): PAVR-20KZ（20kΩ, 1/4W）
  • External DC Voltage: 0~5 VDC or 0~10 VDC switching, 1 mA min.
Control Power Supply 24 VDC±10 % min. 100 mA
Input Signals Photocoupler Input 　Input Resistance: 4.7 kΩ
FWD, REV, INT/EXT, ALARM-RESET
Output Signals Open-collector output max. 30 VDC
SPEED-OUT: max. 10 mA, ALARM-OUT: max. 40 mA
Protective Functions

When the following protective functions are activated, the motor will coast to a stop, and the ALARM output will be turned off.
The LED of the speed controller blinks the number of times in parentheses.

  • Motor Lock (2 times): When the motor output shaft is restrained for 5 seconds min., or when the tachogenerator wire is disconnected or poorly connected
  • Motor Overheat (9 times): When the motor's built-in thermal protector operates (OPEN)., when the motor wire is disconnected or poorly connected
Insulation Resistance After continuous operation at normal ambient temperature and humidity, the measurement value between the main circuit terminal and the control circuit terminal or the main circuit terminal and the case is 100 MΩ min. using a 500 VDC megger.
Dielectric Strength After continuous operation at normal ambient temperature and humidity, no abnormality is observed when 1.9 kVAC at 50 Hz or 60 Hz is applied between the main circuit terminals and the control circuit terminals, or between the main circuit terminals and the case for 1 minute.
Operating Ambient Temperature 0~+50°C (Non-freezing)
Operating Ambient Humidity 85 % max. (Non-condensing)
Degree of Protection IP10

Note

  • Vertical operation (gravitational operation) is not possible.

มาตรฐาน

Regulations and Standards Materials

Documents about compliance with regulations and standards can be downloaded from the "Data Download" tab on the product details page.
(The types of files available for download vary by product.)

Explanations of the Global Laws, Regulations and Standards can be found here.

Information about our compliance with safety standards for each of our product models can be found here.

Hazardous Substances

The product does not contain any substances (10 substances) exceeding the regulation values of the RoHS Directive (2011/65/EU, 2015/863/EU).

การกำหนดค่าระบบ

System Configuration

สายเคเบิลและอุปกรณ์เสริม

ดาวน์โหลดข้อมูล
close